How to add a water spigot

Installing A Water Spigot In The Garage

How to add a water spigot


how to add a water spigot

How to Install an Outdoor Faucet

Jun 30,  · I show just how easy it is to come up with a quick design and make a remote water spigot for watering gardens, tree, sprinklers, outdoor sinks, or just to sp. Sep 27,  · We had a drought this year and I was tired of lugging the hose and sprinkler around the deck. So I built this devise to eliminate that problem. The hose no.

I wanted hiw wash the car and have it nice and clean, so my lady and I could drive down to Foxwoods in style. How to play transfers in bridge was pretty dirty and needed a good wash. I think the part I hate waer most is hooking up the hose outside and then having to unhook it to put it back in the garage. The reason I would have to go downstairs to turn the valve on is because of freezing in the winter.

No valve downstairs, frozen and broken water spigot upstairs come spring. I had a great idea. Why not install a water spigot inside the garage? This way, I can keep a hose hooked up all the time and not have to worry about the spigot freezing over the winter. I could use the spigots that are outside for watering and things like that over the summer, but for washing the car and things like s, I could use the inside one.

I thought it would be very handy. Since the area I wanted the spigot located in the garage was right on the other side of the washing machine hookups down in the basement, I figured it would be a pretty easy job. Somehow, I would just tap into the cold water feed for the washing machine. I really look forward to these types of projects because I have to get imaginative. I enjoy standing in the pluming aisle at Home Depot trying to figure things out. I really do. I drilled the hole from the basement and saw daylight.

Lucky me. Watre went upstairs to the garage and saw a hole right where I wanted the spigot to be. Really lucky me. I started getting my thoughts together and made a little list. Then, I hopped in the car and drove over to Home Depot. I am not going to give you the list of parts I bought here because I forget what they are.

Hopefully you can see them in the pictures I will show you. As I post the pics, Hiw will probably remember car repair how to guides they were. Take a look at the finished product. Let me do a little explaining.

I know the proper way to do this is with copper piping. I may change that some day. For this application, I used hose. When I am not using the spigot, I can just go downstairs to turn the valve off. Also, the reason the spigot is mounted to 2x4s is because I wanted xpigot really solid on what type of simple machine is a light bulb wall. Jow everything was all set up, I hooked up a nice brand new no-kink garden hose I bought spiigot autumn to the spigot in the garage.

If you enjoyed reading this post as much as I enjoyed writing it, why not sign up to receive my posts by email? It's free and you can unsubscribe at any time! Ah, smart man. Who said anything about a spicket? To think, I even Googled that word before I started writing and saw all sorts of references about spickets. Take a look at spicket in Google images. Direct link to the next post? Your hod address will not wayer published.

Email Updates! Comments By spicket, I think you mean spigot, which is also known as a faucet, valve or tap. Leave a Reply Aater reply Your email address will not be published.

Follow This Old House online:

Probably the easiest way to get water is to install a tee fitting on the current hose spigot. Before you start, map out where you will need to dig. If you want to avoid your delicate plants, you will have to go around them, but this means more digging, and of course more aches. You can use a trenching shovel, which is just a 4-inch-wide shovel.

My problem is getting water to the odd-shaped part so that I can hand-water some plants. I have a hose spigot on the back of my house, but I don't want to roll out the garden hose because it will damage other sensitive plants in its path. I would really like another hose spigot in this area. How can I do it? I mean, I can understand not wanting to trample over other plants, but the alternative is to trench a swath in the earth and run a water line. That adds up to a lot of hard work and about two weeks of muscle stiffness.

If you are ready for the suffering to begin, then read on. You will have to tap into a pressurized water line. There are a couple of options here. If you know where the main water line runs into the back yard for irrigation, you could always use that. You would need to cut into the pipe before it reaches the sprinkler valves, install a tee fitting, and run the new water line from there. There is some guesswork to finding the location of the pipe underground.

Probably the easiest way to get water is to install a tee fitting on the current hose spigot. Before you start, map out where you will need to dig. If you want to avoid your delicate plants, you will have to go around them, but this means more digging, and of course more aches.

You can use a trenching shovel, which is just a 4-inch-wide shovel. Dig down to a depth of about 12 inches so that shovels or a fierce game of lawn darts won't damage the pipe, you will also want to get below the frost line. If you need to change direction, say to avoid a garden, use elbow fittings. Once the trench is dug, shut off the main water supply at the street and remove the spigot.

It will likely be attached to a copper pipe with a threaded fitting or a compression fitting on the end of it. You will need to sweat a tee fitting onto this pipe. Face the middle opening of the "T" upwards so that you can attach a backflow valve. The backflow valve a.

The anti-siphon valve is U-shaped so one side will sit on top of the "T" and the other side will face downward and be attached to the pipe that runs underground. There are several different setups for backflow protection. With a pressure breaker valve, you will need to install separate shutoff valves on each side and reconfigure the piping.

There is also a backflow device that simply screws onto the end of the hose spigot. It's cheap and fast. You might be tempted to forego all of this work and just buy a fitting that screws on the current spigot to redirect the water down it's shaped like the letter "Y".

Don't do it. It will soon leak, and when it does, you will have to disassemble the whole thing and do the job the right way. At some point you will change from the copper piping to PVC. You will need either a male or female PVC fitting to attach to the mating piece on the end of the copper.

Wrap the fitting three times with teflon tape and you're good to go. Use PVC primer and glue at each connection. The new hose bib should be connected to a stable surface, like a wall. At the end of the trench, elbow the pipe upward and run it against the wall. Cut the pipe, elbow it away from the wall, and attach the new hose bib. Finally, grab the bottle of aspirin and get ready for the agony. All rights Reserved.

Please direct questions and comments to questions pro-handyman. Need Help? Contact Us! First Name. Last Name. Email we will keep your email completely private.



More articles in this category:
<- Amerigo vespucci what did he discover - How to get supervised visits->

Comment on post

5 to post “How to add a water spigot

Mugal

I can never stop dealing with hackerdrills on instagram they are fast and reliable

Reply

Add a comment

Your email will not be published. Required fields are marked *